1) Unscrew the knobs
on the L-shaped clamps and loosen the clamps
from the table leg.
2) Push the lever on the hinge forward to open
the leg. The leg will lock into position when
the hinge is fully open.
3) Position the overhang on the edge of your
surface. Unscrew the knobs on the leg and adjust
the leg so that the ANYWHERE TABLE top is level
with your surface. Tighten the knobs on the
leg to maintain the correct height.
4)
Depending on the thickness of your surface,
turn the clamps under the table so that
one side of the clamp touches the bottom
of the ANTWHERE TABLE and the other side
touches the bottom of your surface. Tighten
the knobs on the clamps to secure the ANYWHERE
TABLE to your surface.
